How to use the concrete block calculator
- Enter the wall length and height in feet.
- Subtract any openings in square feet.
- Choose the block face size. The standard 8 × 8 × 16 block lays up to 16 × 8 inches with the mortar joint.
- Keep about 5% extra for breakage and cuts.
- Prefer metric? Tap Metric above the form to enter meters, centimeters and millimeters and get results in cubic meters, square meters and tonnes.
Formula
Blocks per sq ft = 144 ÷ (face length × face height, in inches, including the joint)
Blocks = (wall area − openings) × blocks per sq ft × (1 + waste), rounded up
Worked example
A 40 × 6 ft wall is 240 sq ft. Standard blocks lay at 1.125 per square foot, so you need 270 blocks before waste and 284 blocks with 5% extra.
Tips before you buy
- Wall height in courses = height in inches ÷ 8 for standard block.
- You will need corner and half blocks for ends and openings. Ask your supplier for the right mix.
- Block walls need a proper footing, and many need rebar and grout. Follow local code or an engineer’s design.
- For retaining walls, special segmental blocks are often used instead of standard CMU.
Frequently asked questions
How many concrete blocks per square foot?
For standard 8 × 8 × 16 blocks, 1.125 blocks per square foot, or 112.5 blocks per 100 square feet.
How many courses of block for a 6 ft wall?
Nine courses: 72 inches ÷ 8 inches per course.
How many blocks per square meter?
About 9.9 blocks for 440 × 215 mm blocks with 10 mm joints, or 12.5 for 390 × 190 mm blocks.
How much extra block should I order?
About 5% is typical; more for walls with many corners or openings.
Last updated: