How to use the drywall calculator
- Measure the room length, width and wall height in feet.
- Choose whether you are also covering the ceiling.
- Pick the sheet size. Larger sheets mean fewer seams to tape.
- Count doors and windows and keep about 10% extra for cuts.
- Prefer metric? Tap Metric above the form to enter meters, centimeters and millimeters and get results in cubic meters, square meters and tonnes.
Formula
Wall area = 2 × (length + width) × height
Total area = wall area + ceiling area − openings (20 sq ft per door, 15 per window)
Sheets = total area × (1 + waste) ÷ sheet area, rounded up
Worked example
A 14 × 12 ft room with 8 ft walls has 416 sq ft of wall and a 168 sq ft ceiling. After one door and two windows, 534 sq ft is left. With 10% waste you need 19 sheets of 4 × 8 drywall and about 608 screws.
Tips before you buy
- Hang the ceiling first, then the walls, so the wall sheets help support the ceiling edges.
- Half-inch board is common on walls. Ceilings and fire-rated areas may need thicker board, so check your plans and local code.
- Many pros do not subtract small windows because the offcuts are rarely reusable.
- Joint tape, compound and corner bead are bought separately.
Frequently asked questions
How many sheets of drywall do I need for a 12×12 room?
With 8 ft walls and a ceiling, the area is about 528 sq ft. With 10% waste that is 19 sheets of 4 × 8 drywall.
How many screws per sheet of drywall?
Roughly one screw per square foot, or about 32 for a 4 × 8 sheet. Exact spacing depends on framing and code.
Should I use 4×8 or 4×12 sheets?
Longer sheets mean fewer joints to tape, but they are heavier and harder to carry. Use what you can handle safely.
How much extra drywall should I buy?
About 10% for typical rooms, more if there are many corners, angles or openings.
Last updated: