How to use the tile calculator
- Enter the length and width of the area in feet.
- Enter the tile length and width in inches and the grout joint width.
- Keep 10% waste for a straight layout, more for diagonal or herringbone patterns.
- Enter tiles per box to see how many boxes to buy.
- Prefer metric? Tap Metric above the form to enter meters, centimeters and millimeters and get results in cubic meters, square meters and tonnes.
Formula
Area = length × width (sq ft)
Area per tile = (tile length + grout) × (tile width + grout) ÷ 144
Tiles = area ÷ area per tile × (1 + waste), rounded up
Worked example
A 12 × 10 ft floor is 120 sq ft. Each 12 × 12 inch tile with a 1/8 inch grout joint covers about 1.02 sq ft, so you need 118 tiles before waste and 130 tiles with 10% extra.
Tips before you buy
- Use about 10% extra for straight layouts and 15% or more for diagonal or herringbone patterns.
- Buy all tiles from the same batch or lot so the color and size match.
- Keep a few spare tiles after the job for future repairs.
- Large tiles need a flat floor. Check the substrate before you buy.
Frequently asked questions
How many 12×12 tiles do I need for 100 square feet?
With a 1/8 inch grout joint, about 98 tiles before waste and about 108 with 10% extra.
How much extra tile should I buy?
Ten percent for simple layouts, 15–20% for diagonal, herringbone or rooms with many cuts.
Does grout width change the number of tiles?
Slightly. Wider joints mean each tile covers a bit more area, so you need fewer tiles.
How do I measure a room for tile?
Measure length and width at the widest points in feet, and add separate areas for closets or alcoves.
Last updated: